Nilfisk-Advance SC3000 Service Manual

Control System 29Service Manual – SC3000
Display of Current Values of Signicant Variables, Hour Counters and
Stored Alarms
1. Turn the ignition switch to “0”.
2. Open the electrical component compartment.
3. Connect the ITALSEA programmer, NILFISK P/N 9097297000 to the function electronic board
connector J9 (A).
A
M1
M2
J7A
J7B
J8
J9
J1
J3
J4
J2
J5
J6
VA-
VA+
A
P100401
4. Turn the ignition switch to “I”.
5. Scroll with the UP and DOWN buttons the pages in the order shown in the table below.

Nilfisk-Advance SC3000 Specifications

General

Brand	Nilfisk-Advance
Model	SC3000
Category	Scrubber
Language	English