Nilfisk-Advance SC401 Series - Page 166

166Service Manual – SC401, SCRUBTEC 344 40 - Recovery System
Container and Vacuum Motor Disassembly/Assembly (continues)
6. Remove the external soundproong support (E) from the internal soundproong case (F).
7. Remove the ferrite (G) from the wire.
8. Unscrew the 4 screw (H).
Figure 8:
E
G
H
H
H
H
F
9. Lift the outer container (I) out of the inner container (J), then extract the motor (K).
Figure 9:
K
I
J