Nipro RO MEDICAL-BASIC - Adjustment of the Conductivity; Service Point

Fehler! Verwenden Sie die Registerkarte 'Start', um Title;Title dem Text zuzuweisen, der hier angezeigt werden soll. |
12 | 04.10.2021 | Page 35
12.1 Adjustment of the conductivity
- Select parameter Conductivity.
- "Ax" value = displays conductivity
- Select value "B" and confirm with Enter.
- Change the value with the arrow keys. (+00001 = current value +1)
- To change in minus, first enter the value and after the change the sign ( -00001 = current value
-1 )
- press enter
- Press ESC several times (until time is displayed), then arrow key up.
12.2 Service point
The service point can be used for water withdrawal to check water temperature and conductivity.
Service point may only be opened, if operating pressure in the system is
reached.
Service point must be closed prior to each system start. Service point may
only be operated by
technically trained personnel
.