4
• Chapter 5 “Using CONTROL” — Includes descriptions of all NKT CONTROL
menu, settings, and panel items.
• Chapter 6 “Software Development Kit” — Includes descriptions and
procedures for some of the key settings that can be configured using the
SDK.
• Chapter 7 “Mechanical Installation” — Includes information and procedures on
how to correctly install the laser chassis. Procedures within this chapter focus
on providing adequate temperature regulation.
• Chapter 8 “Connecting the Laser” — This chapter provides the information on
how to physically connect the safety interlock, power, the optical
connections, and the BASIK interface board accessory.
• Appendices — The guide includes multiple appendices including laser
specifications, support contact details, accessory descriptions, a
configuration ID cross-reference and miscellaneous procedures and
information supporting the laser operation and installation.
Added information
and safety notices
Lasers are highly dangerous devices that can cause serious injury and property
damage. This guide use the following symbols to either highlight important safety
information or provide further information in relation to a specific topic.
Note: Highlights additional information related to the associated topic and/or
provides links or the name of the NKT guides describing the additional informa-
tion.
Caution: Alerts you to a potential hazard that could cause loss of data, or damage
the system or equipment.
Warning: The laser safety warning alerts you to potential serious injury that may
be caused when using the laser.
Revision The section records the document revision details.
Date Revision Changes
2019-10 1.0 First release - documents rewritten and overhauled from earlier releases.
2020-01 1.1 Added appendix F - Configuration IDs: configuration ID description and
cross-reference for standard configuration IDs.
To Next Page
Loading...