3
GUIDE OVERVIEW
This product guide is intended to provide functional, operational and installation
information for the Koheras BASIK laser modules. The guide is divided into three
sections:
• Koheras BASIK Description - introduces the laser, its functionality, interfaces
and chassis variants.
• Operating the Laser – provides information and procedures on how to
connect, configure and manage the laser.
• Installing the Laser – includes the details on how to install the laser and
connect optional interfaces.
Warning: Do not operate the laser before first reading and understanding all
warnings, cautions and handling information stated within the document:
Koheras BASIK Safety, Handling and Regulatory Information
Note: The paper copy of this document is included with your laser however it can
also be downloaded from:
https://www.nktphotonics.com/lasers-fibers/support/product-manuals/
Terminology This guide may refer to the Koheras BASIK modules as “the laser”. In specific
cases where a distinction is required, this guide will use the actual laser model
names or simply refer to the laser as the “module”.
Target audience This guide is for technical personnel involved in the selection, planning and
deployment of lasers in laboratory and industrial settings. The guide assumes a
reasonable knowledge level of lasers, photonic principles and electrical interface
connectivity.
Chapters inside This guide includes the following chapters:
• Chapter I “Laser Description” — Describes the laser including its general
operational principles, management and interfaces.
• Chapter 2 “Modulation” — Information on implementation of the laser’s
wavelength modulation feature.
• Chapter 3 “Communicating with the Laser” — Provides information and
procedures on how to setup a PC with the laser’s management software and
connect it to the laser.
• Chapter 4 “Turning ON the Laser” — Contains procedures on how to safely
turn the laser emissions on and off using the management software.
To Next Page
Loading...