Noaw TWS - Page 58

Use and maintenance
56
7. At the end of the cutting operations turn
the thickness regulating knob back to ‘0’ and
pull back the carriage.
Stop the blade movement by pushing the 0
button.
STRAIGHT FEED SLICER FOR MEAT
1. Check that the regulating knob for slice
thickness is on ‘0’;
2. Pull back the plate completely (towards the
operator) to the loading position.
3. Lift up the food press and put it in the rest
position;
4. Place the meat to be sliced on the plate
against the operator’s side.
Block it with the food press by pressing down
slightly;
5. Regulate the thickness of the slice.
Start the blade by pressing the I button. Grip
the handle of the food press and start cutting
with combined pressure parallel to the blade
(alternating movement of the food) and
perpendicular to the same (advancement of
food);