2. To call the number, press the call key. To adjust the volume in a call, press
the volume key up or down.
3. To end the call or to cancel the call attempt, press the end key.
You can search for a name or phone number that you have saved in Contacts.
See "Search for a contact," p. 46. Press the call key to call the number.
To access the list of dialed numbers, press the call key once in the standby mode.
To call the number, select a number or name, and press the call key.
Dialing shortcuts
Assign a phone number to one of the number keys, 2 to 9. See "Dialing
shortcuts," p. 47.
Call the number in one of the following ways:
Press a number key, then the call key.
OR
If Speed dialling is set to On, press and hold a number key until the call begins.
Further details are described in Speed dialling. See "Call," p. 57.
Enhanced voice dialing
You can make a phone call by saying the name that is saved in the contact list
of the device.
Voice commands are language-dependent. Set the Voice recognition
language before using voice dialing. See "Phone," p. 58.
Note: Using voice tags may be difficult in a noisy environment or during
an emergency, so you should not rely solely upon voice dialing in all
circumstances.
1. In the standby mode, press and hold the right selection key or the volume
down key. A short tone sounds, and Speak now is displayed.
2. Speak the name of the contact you want to dial clearly. If the voice
recognition is successful, a list with matches is shown. The device plays the
Call functions
24
Cyan
Magenta
Yellow
Black
file:/D:/temp/overmode/GUID-89DCE1F7-7FBF-406A-B7B2-EFBE6DD81560.20070504145158174.en1178280131751/en/1/GUID-FACEAA13-0984-49EC-B52F-
E61DA4535A75.xml Page 24 May 4, 2007 3:02:55 PM
To Next Page
Loading...
