• Flight query — The device asks every time when it is switched on whether
you want to use the flight profile. With the flight profile, all radio connections
are switched off. The flight profile should be used in areas sensitive to radio
emissions.
• Phone updates — to receive software updates from your service provider
(network service). This option may not be available, depending on your
device. See "Software updates over the air," p. 61.
• Operator selection — Select Automatic to set the device to automatically
select one of the cellular networks available in your area. With Manual you
can select a network that has a roaming agreement with your service
provider.
• Confirm SIM service actions — See "SIM services," p. 88.
• Help text activation — to select whether the device shows help texts
• Start-up tone — The device plays a tone when it is switched on.
Enhancements
This menu or the following options are shown only if the device is or has been
connected to a compatible mobile enhancement.
Select Menu > Settings > Enhancements. Select an enhancement, and
depending on the enhancement, from the following options:
• Default profile — to select the profile that you want to be automatically
activated when you connect to the selected enhancement
• Automatic answer — to set the device to answer an incoming call
automatically after 5 seconds. If Incom. call alert: is set to Beep once or
Off, automatic answer is off.
• Lights — to set the lights permanently On. Select Automatic to set the lights
on for 15 seconds after a keypress.
• Text phone — Select Use text phone > Yes to use this setting instead of
headset or loopset settings.
Settings
59
Cyan
Magenta
Yellow
Black
file:/D:/temp/overmode/GUID-89DCE1F7-7FBF-406A-B7B2-EFBE6DD81560.20070504145158174.en1178280131751/en/1/GUID-FACEAA13-0984-49EC-B52F-
E61DA4535A75.xml Page 59 May 4, 2007 3:02:55 PM
To Next Page
Loading...
