• Anykey answer — Select On to answer an incoming call by briefly pressing
any key, except the power key, the left and right selection keys, or the end
key.
• Automatic redial — Select On to make a maximum of 10 attempts to
connect the call after an unsuccessful call attempt.
• Speed dialling — Select On to dial the names and phone numbers assigned
to the number keys 2 to 9 by pressing and holding the corresponding number
key.
• Call waiting — Select Activate to have the network notify you of an
incoming call while you have a call in progress (network service). See
"Answer or reject a call," p. 25.
• Summary after call — Select On to briefly display the approximate duration
after each call.
• Send my caller ID — Select Yes to show your phone number to the person
you are calling (network service). To use the setting agreed upon with your
service provider, select Set by network.
• Line for outgoing calls — to select the phone line 1 or 2 for making calls if
supported by your SIM card (network service)
Phone
Select Menu > Settings > Phone and from the following options:
• Language settings — To set the display language of your device, select
Phone language. Automatic selects the language according to the
information on the SIM card. To select the USIM card language, select SIM
language. To set a language for the voice playback, select Voice
recognition language. See "Enhanced voice dialing," p. 24.
• Security keyguard — To set the device to ask for the security code when
you unlock the keyguard. Enter the security code, and select On.
• Automatic keyguard — to lock the keypad automatically after a preset time
delay when the device is in the standby mode and no function of the device
has been used. Select On, and set the time.
• Welcome note — to write the note that is shown when the device is
switched on
Settings
58
Cyan
Magenta
Yellow
Black
file:/D:/temp/overmode/GUID-89DCE1F7-7FBF-406A-B7B2-EFBE6DD81560.20070504145158174.en1178280131751/en/1/GUID-FACEAA13-0984-49EC-B52F-
E61DA4535A75.xml Page 58 May 4, 2007 3:02:55 PM