Make a PTT call to multiple recipients
You can select multiple PTT contacts from the contact list.
1. Select Menu > Push to talk > Contacts list, and mark the desired contacts.
2. Press and hold the PTT (volume up) key to start the call. The participating
contacts are shown on the display as soon as they join the call.
3. Press and hold the PTT (volume up) key to talk to them. Release the PTT
(volume up) key to hear the response.
4. Press the end key to terminate the call.
Receive a PTT call
A short tone notifies you of an incoming PTT call, which you can accept or reject.
When you press and hold the PTT (volume up) key while the caller is talking,
you hear a queuing tone, and Queuing is displayed. Wait for the other person
to finish; then you can talk immediately.
Callback requests
Send a callback request
If you make a one-to-one call and do not get a response, you can send a callback
request from following lists:
• Menu > Contacts > Names
• Menu > Push to talk > Callback inbox, Channel list, or Contacts list
Select a contact, a member, or a nickname and Options > Send PTT
callback.
Respond to a callback request
When someone sends you a callback request, Callback request received is
displayed in the standby mode. To open the Callback inbox, select View. The
list of nicknames of the persons who have sent you callback requests is shown.
To make a one-to-one call, select the desired request, and press and hold the
PTT (volume up) key.
Push to talk
74
Cyan
Magenta
Yellow
Black
file:/D:/temp/overmode/GUID-89DCE1F7-7FBF-406A-B7B2-EFBE6DD81560.20070504145158174.en1178280131751/en/1/GUID-FACEAA13-0984-49EC-B52F-
E61DA4535A75.xml Page 74 May 4, 2007 3:02:55 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
