voice command of the first match on the list. If it is not the correct command,
scroll to another entry.
Using voice commands to carry out a selected device function is similar to voice
dialing. See "Voice commands," p. 52.
Answer or reject a call
To answer an incoming call, press the call key. To end the call, press the end
key.
To reject an incoming call, press the end key. To mute the ringing tone, select
Silence.
To answer a waiting call during an active call (network service), press the call
key. The first call is put on hold. To end the active call, press the end key. You
may also activate the Call waiting function. See "Call," p. 57.
Options during a call
Many of the options that you can use during a call are network services. For
availability, contact your service provider.
During a call, select Options and from the following options:
Call options are Mute or Unmute, Contacts, Menu, Lock keypad, Record,
Voice clarity, Loudspeaker or Handset.
Network options are Answer or Reject, Hold or Unhold, New call, Add to
conference, End call, End all calls, and the following:
• Send DTMF — to send tone strings
• Swap — to switch between the active call and the call on hold
• Transfer — to connect a call on hold to an active call and disconnect yourself
• Conference — to make a conference call
• Private call — to have a private discussion in a conference call
Warning: Do not hold the device near your ear when the loudspeaker
is in use, because the volume may be extremely loud.
Call functions
25
Cyan
Magenta
Yellow
Black
file:/D:/temp/overmode/GUID-89DCE1F7-7FBF-406A-B7B2-EFBE6DD81560.20070504145158174.en1178280131751/en/1/GUID-FACEAA13-0984-49EC-B52F-
E61DA4535A75.xml Page 25 May 4, 2007 3:02:55 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
