Add a one-to-one contact
You can save the names of persons to whom you often make one-to-one calls
in the following ways:
• To add a PTT address to a name in Contacts, search for the desired contact,
and select Details > Options > Add detail > PTT address. A contact
appears in the PTT contact list only if you enter a PTT address.
• To add a contact to the PTT contacts list, select Menu > Push to talk >
Contacts list > Options > Add contact.
• To add a contact from the channel list, connect to the PTT service, select
Channel list, and scroll to the desired channel. Select Members, scroll to the
member whose contact information you want to save, and select Options.
• To add a new contact, select Save as. To add a PTT address to a name in
Contacts, select Add to contact.
PTT settings
Select Menu > Push to talk > PTT settings and from the following options:
• 1 to 1 calls — Select On to allow the reception of incoming one-to-one calls.
To set the device to first notify you of incoming one-to-one calls with a
ringing tone, select Notify.
• PTT key default function — to set the PTT (volume up) key to one of the
following functions: Open contact list, Open channel list, or Call contact/
group. Select a contact, a group, or Call PTT channel; and select a channel.
When you press and hold the PTT (volume up) key, the selected function is
performed.
• Show my login status — to enable or disable the sending of the login status
• PTT status in startup — Select Yes or Ask first to automatically connect to
the PTT service when you switch the device on.
• Push to talk when abroad — to switch the PTT service on or off when the
device is used outside of the home network
• Send my PTT address — Select No to hide your PTT address from channel
and one-to-one calls.
Push to talk
75
Cyan
Magenta
Yellow
Black
file:/D:/temp/overmode/GUID-89DCE1F7-7FBF-406A-B7B2-EFBE6DD81560.20070504145158174.en1178280131751/en/1/GUID-FACEAA13-0984-49EC-B52F-
E61DA4535A75.xml Page 75 May 4, 2007 3:02:55 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
