Infrared
You can set up the phone to send and receive data through its infrared (IR) port
to or from a IRDA compatible phone or data device.
Do not point the infrared (IR) beam at anyone's eye or allow it to interfere with
other IR devices. This device is a Class 1 laser product.
When sending or receiving data, ensure that the IR ports of the sending and
receiving devices are pointing at each other and that there are no obstructions
between the devices.
To activate or deactivate the IR port of your phone, select Menu > Settings >
Connectivity > Infrared.
If the data transfer is not started within 2 minutes after the activation of the
IR port, the connection is cancelled and must be started again.
IR connection indicator
• When
is shown continuously, the IR connection is activated, and your
phone is ready to send or receive data through its IR port.
• When
blinks, your phone is trying to connect to the other device, or a
connection has been lost.
Bluetooth
Bluetooth wireless technology
Bluetooth technology allows you to connect the device to a compatible
Bluetooth device within 10 meters (32 feet). Since devices using Bluetooth
technology communicate using radio waves, your device and the other devices
do not need to be in direct line-of-sight, although the connection can be subject
to interference from obstructions such as walls or from other electronic devices.
This device is compliant with Bluetooth Specification 2.0 + EDR supporting the
following profiles: generic access, network access, generic object exchange,
advanced audio distribution, audio video remote control, hands-free, headset,
object push, file transfer, dial-up networking, SIM access, and serial port. To
Settings
53
Cyan
Magenta
Yellow
Black
file:/D:/temp/overmode/GUID-89DCE1F7-7FBF-406A-B7B2-EFBE6DD81560.20070504145158174.en1178280131751/en/1/GUID-FACEAA13-0984-49EC-B52F-
E61DA4535A75.xml Page 53 May 4, 2007 3:02:55 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
