Copyright
©
2005 Nokia. All rights reserved.
Connectivity
151
3 Tap OK to save the settings.
To edit configuration profile settings, select a profile
and tap Settings.
Data transfer
Go to Desk > Data transfer.
The Data transfer application enables you to synchronise
or copy your calendar or contacts data between your
smartphone and another Bluetooth-enabled mobile phone.
To start data transfer wizard, tap New and follow the
instructions. You can define the type and direction of
transfer and select what to transfer.
Synchronisation
Go to Desk > Sync.
The Sync application enables you to synchronise your
calendar or contacts with various calendar and address
book applications on a compatible computer or on the
Internet. Remote synchronisation takes place over a GSM
data call or GPRS connection, local synchronisation takes
place via a Bluetooth and USB connection.
The Sync application uses SyncML technology (version
1.1.1) for remote synchronisation. For information on
SyncML compatibility, please contact the supplier of the
calendar or address book application you want to
synchronise with your smartphone.
To synchronise data, open the Sync application, select
a profile from the list and tap Synchronise. You are
notified when the synchronisation has been completed.
To view the synchronisation log, tap View when
synchronisation is complete. The log file shows the
synchronisation status of the selected profile, and how
many calendar or contact entries have been added,
updated, deleted, or discarded (not synchronised) in
the smartphone or on the server.
Creating a new synchronisation profile
The synchronisation profile is the settings for the remote
server. You can create several profiles if you need to
synchronise your data with multiple servers or
applications.
You may receive the synchronisation settings as a special
message from your service provider.
1 Open the Sync application and press . Select Profile
> New.... Choose whether you want to copy the values
from an existing profile to be used as the basis for the
new profile.
2 The Profile Wizard opens. Define the following:
Name: - Write a descriptive name for the profile.
Data bearer: - Specify whether you want to synchronise
via the Internet or by using local connections.
Access point: - Select the access point you want to use
for the data connection.
Host address: - Contact your service provider or system
administrator for the correct value.
To Next Page
Loading...
Need help?
General
