Nokia 9500 - Page 91

Telephone language
• To change the language of the device , select
General → Telephone language. Select the new
language from the list, and press Done. Press
Reboot to restart the device.
My own key
• To select the application that opens when you press
the My own key, select General → My own key.
Press Select, select the application, and press Done.
Display
• To define the contrast and brightness of the display,
select General → Display.
Define the following:
• Contrast level—Press + or - to increase or
decrease the difference between the lightest and
darkest areas on the screen.
• Brightness—Press + or - to increase or decrease
the amount of white the colors contain.
• Brightness period—Select a time period after
which the display is dimmed if the device remains
inactive.
• Screen saver—Select a time period after which the
display is automatically switched off if there have
been no key presses within that time.
Tip: You can adjust brightness also by pressing
Chr+space bar.
• To define the color set for the dialogs and controls,
select General → Display. On the Color page,
select the Color palette field, select one of the color
sets, and press Done.
• To define the cursor speed and acceleration, select
General → Display, and select the Cursor settings
page. Specify how fast the cursor moves, and how
much it accelerates as you move it faster.
Wallpapers
• To change the background image of the
communicator interface, select General →
Wallpapers. Select the Desk page, and in the
Wallpaper field, select Yes. Select the Image file
field, and press Change. Pre-installed wallpapers
are shown in the Select wallpaper dialog. To
search for other files, press Browse. Note that by
default only image files are shown. To view other
types of files, press Show all files. To view the
selected image, press Preview.
Similarly, you can change the background image of the
cover phone display on the Cover page.
Enhancement settings
• To let the device answer phone calls automatically
when an enhancement is in use, select General →
Enhancement settings , select Headset, Loopset,
orCar kit from the list, and press Edit. In the
Automatic answer field, select On.
• To select the profile that is activated when you
attach an enhancement to your device, select
General → Enhancement settings , select
Headset, Loopset, Car kit, or TTY from the list, and
press Edit. Change the profile in the Default profile
91
Control panel
file:///C:/USERS/MODEServer/tkoikkal/864507/RA-2_Erin/en/issue_1/ra-2_erin_en-us_1.xml Page 91 Jul 2, 2004 11:32:12 AMfile:///C:/USERS/MODEServer/tkoikkal/864507/RA-2_Erin/en/issue_1/ra-2_erin_en-us_1.xml Page 91 Jul 2, 2004 11:32:12 AM