Nokia 9500 - Profiles; Settings

• In standby mode, press Names (if available), or
press Go to, and select Contacts.
• In standby mode, scroll down to the desired name,
press Details, and scroll to a number.
• During a call, press Options, and select Contacts.
Searching for, adding, and
deleting contacts
• To search for a contact, in standby mode, press
Menu, and select Contacts → Search, or press the
scroll key down in standby mode. Key in the first
letters of the desired name. Scroll to the desired
name, and press Details. Scroll through the phone
numbers added to the name.
• To save a name and phone number in the selected
memory, press Menu, and select Contacts → Add
name. Key in the first name, and press OK. Key in
the second name, and press OK. Key in the phone
number, including the area code, and press OK.
Select the number type, and press Select → Done.
Tip: To use the phone number while
abroad, press
twice (for the +
character), and key in the country code,
area code (omit the leading zero, if
necessary), and phone number.
• To delete contacts and all the numbers attached to
them, in standby mode, press Menu, and select
Contacts → Delete. Select One by one or Delete all.
• To delete a single number added to a name, in
standby mode, scroll down to the desired name,
and press Details. Scroll to the number that you
want to delete, press Options, and select Delete
number.
Settings for the contacts
In standby mode, press Menu, and select Contacts →
Settings, and one of the following options:
• Memory in use—To select the memory that you
want to use for your contacts.
• Contacts view—To select how the contacts are
shown.
Profiles
Press Menu, and select Profiles.
• To change the profile, select the desired profile, and
select Activate.
• To activate a profile for a certain time, select the
desired profile and Timed. Set the time (up to 24
hours) when you wish the profile setting to end.
When the end time is reached, the previous profile,
which was not timed, becomes active.
Tip: To activate a profile in standby mode,
briefly press the power key, and select the
desired profile.
You can edit the profile settings in the communicator
interface of your device.
Settings
Press Menu, and select Settings.
• To adjust call settings, select Call settings. Select
from the following options: Select Call forward
Select Anykey answer and On if you want to
answer an incoming call by briefly pressing any key
31
Cover phone
file:///C:/USERS/MODEServer/tkoikkal/864507/RA-2_Erin/en/issue_1/ra-2_erin_en-us_1.xml Page 31 Jul 2, 2004 11:32:12 AMfile:///C:/USERS/MODEServer/tkoikkal/864507/RA-2_Erin/en/issue_1/ra-2_erin_en-us_1.xml Page 31 Jul 2, 2004 11:32:12 AM