Nokia 9500 - Messaging; Connections

Data call and fax call diverting
(network service)
Call diverting allows you to direct your incoming data
and fax calls to another phone number.
• To divert data or fax calls, select Telephone →
Data call forwarding or Fax call forwarding.
Define the following:
• Forward all calls—When activated, all incoming
calls are diverted.
• Forward if busy—When activated, incoming calls
are diverted if you are engaged in another call.
• Forward if out of reach—When activated,
incoming calls are diverted when the device is
switched off or outside the network service area.
• Forward if not answered—When activated,
incoming calls are diverted if you do not answer
them within a certain time period.
• Forward if not available—In a single action, this
option activates the following: Forward if busy,
Forward if out of reach, and Forward if not
answered.
• To check whether the divert is active, select
Telephone → Data call forwarding or Fax call
forwarding, select the divert option, and press
Check status.
• To cancel all data or fax call diverts, select
Telephone → Data call forwarding or Fax call
forwarding, and press Cancel all.
Messaging
Go to Desk → Tools → Control panel → Messaging.
See Editing fax settings on page 53.
See Multimedia message account settings on page 52.
See Text message settings on page 49.
Service message
• To edit reception and authentication settings for
service messages, select Messaging → Service
message. In the Reception: field, select Yes if you
want to receive all service messages to your Inbox.
Select No to ignore all service messages.
Connections
Go to Desk → Tools → Control panel → Connections.
• Internet setup—See Internet setup on page 83.
• Bluetooth—See Bluetooth on page 105.
Wireless LAN
• To view the status of the wireless LAN connection,
select Connections → Wireless LAN. On the
Status page you can view the connection status,
network name, and connection security and quality.
• To view information on networks, wireless LAN
access points, or ad hoc networks, select
Connections → Wireless LAN, and select the
Networks page. In the Display field, select the
network item you want, and press View details.
95
Control panel
file:///C:/USERS/MODEServer/tkoikkal/864507/RA-2_Erin/en/issue_1/ra-2_erin_en-us_1.xml Page 95 Jul 2, 2004 11:32:12 AMfile:///C:/USERS/MODEServer/tkoikkal/864507/RA-2_Erin/en/issue_1/ra-2_erin_en-us_1.xml Page 95 Jul 2, 2004 11:32:12 AM