RM-994/ RM-995/ RM-996
General Information
NOKIA INTERNAL USE ONLY Page 27
Copyright © 2013 Nokia. All rights reserved.
The HW module is not protected against water. Condensed or splashed water might cause malfunction.
Any submersion of the phone will cause permanent damage. Long-term high humidity, with condensation,
will cause permanent damage because of corrosion.
Vibration
The module should withstand the following vibrations:
• 1200rpm
• 50dB(A)max
ESD strength
Conducted discharge is 4 kV (>10 discharges) and air contact 8 kV (>10 discharges).
The standard for electrostatic discharge is IEC 61000-4-2, and this device fulfills level 4 requirements.
RoHS
This device uses RoHS compliant components and lead-free soldering process.
To Next Page
Loading...
