RM-994/ RM-995/ RM-996   
BB Troubleshooting Guide   
  NOKIA INTERNAL USE ONLY  Page 79 
Copyright ©  2013 Nokia. All rights reserved. 
WLAN/BT antenna 
The WLAN/BT antenna is laser deposited on a plastic carrier which is part of the CWS carrier assembly on 
the top back side of the phone. The antenna radiator is painted black and is visible only around contact 
areas. The WLAN/BT signal is routed from the connectivity module through the RF diplexer. 
The antenna positions are presented in the following figure. 
 
 
Figure 7  LDS antenna positions 
 
 
Figure 8  WLAN/BT component layout