Connectivity
121
• If the other device requires pairing before data can
be transmitted, a tone sounds and you are asked to
enter a passcode.
• Create your own passcode (1-16 characters long,
numeric) and agree with the owner of the other
Bluetooth device to use the same code. This
passcode is used only once and you do not have to
memorise it.
• After pairing, the device is saved to the Paired
devices view.
Glossary: Pairing means authentication. The
users of the Bluetooth enabled devices should
agree together what the passcode is and use the
same passcode for both devices in order to pair
them. Devices that do not have a user interface
have a factory set passcode.
6 When the connection has been successfully
established, the note Sending data is shown.
Note: Data received via Bluetooth can be found in
the Inbox folder in Messaging. See p. 76 for further
information.
Note: If sending fails, the message or data will be
deleted. The Drafts folder in Messaging does not store
messages sent via Bluetooth.
Icons for different Bluetooth devices:
- Computer,
- Phone,
- Other, and
- Unknown.
Checking the status of the Bluetooth connection
• When is shown in standby mode, Bluetooth is
active.
• When is blinking, your game deck is trying to
connect to the other device.
• When is shown continuously, the Bluetooth
connection is active.
Paired devices view
Pairing with a device makes device searches easier and
quicker. Paired devices are easier to recognise, they are
indicated by in the search result list. In the Bluetooth
main view, press to open a list of paired devices
().
Options in the paired devices
view: New paired device, Connect / Disconnect, Assign
short name, Delete, Delete all, Set as authorised / Set as
unauthorised, Help and Exit.
Pairing with a device
1 Select Options→ New paired device in the Paired
devices view. The game deck starts to search for
devices within range. Or, if you have searched for
Bluetooth devices earlier, a list of the devices that
were found previously is shown first. To start a new
search, select More devices.
2 Scroll to the device you want to pair with and press
Select.
To Next Page
Loading...
