Profiles
91
• Ringing tone - To set the 
ringing tone for voice 
calls, choose a ringing 
tone from the list. When 
you scroll through the list, 
you can stop on a tone to 
listen to it before you 
make your selection. Press 
any key to stop the sound. 
If a memory card is used, 
tones stored on it have the 
 icon next to the tone name.
Ringing tones use shared memory. See ‘Shared 
memory’, p.15.
Note: You can change ringing tones in two 
places: Profiles or Contacts. See ‘Adding a ringing 
tone for a contact card or group’, p. 55.
• Incoming call alert - When Ascending is selected, the 
ringing volume starts from level one and increases level 
by level to the set volume level. 
• Ringing volume - To set the volume level for the ringing 
and message alert tones.
• Message alert tone - To set the tone for messages.
• Vibrating alert - To set the game deck to vibrate at 
incoming voice calls and messages.
• Keypad tones - To set the volume level for keypad tones.
• Warning tones - The game deck sounds a warning tone, 
for example, when the battery is running out of power.
• Alert for - To set the game deck to ring only upon calls 
from phone numbers that belong to a selected contact 
group. Phone calls coming from people outside the 
selected group will have a silent alert. The choices are 
All calls / (list of contact groups, if you have created 
them). See ‘Creating contact groups’, p. 56.
• Profile name - You can rename a profile and give it any 
name you want. The General and Offline profiles 
cannot be renamed.
Offline profile
Note: Your game deck must be switched on to use 
this function. Do not switch the game deck on when 
wireless device, bluetooth or radio use is prohibited or 
when it may cause interference or danger.
Offline profile lets you use the game deck without 
connecting to the GSM wireless network to play games, 
listen to music and the radio.
Important: In Offline profile you cannot make any 
calls, including emergency calls, or use other features 
that require network coverage.
1 Go to Menu→ Profiles.
In the Profiles list, scroll to Offline and select 
Options→ Activate.