Connectivity
122
3 Exchange passcodes, see step 5 (Pairing) in the 
previous section. The device is added to the Paired 
devices list.
Cancelling pairing
• In the Paired devices view, scroll to the device whose 
pairing you want to cancel and press   or select 
Options→ Delete. The device is removed from the 
Paired devices list and the pairing is cancelled.
• If you want to cancel all pairings, select Options→ 
Delete all.
Note: If you are currently connected to a device 
and delete the pairing with that device, pairing is 
removed immediately but the connection will remain 
active.
Assigning short names for paired devices
You can define a short name (nickname, alias), to help you 
recognise a certain device. This name is stored in the game 
deck memory and cannot be seen by other Bluetooth 
device users.
• To assign a short name, scroll to the device and select 
Options→ Assign short name. Write the short name 
and press OK.
Example: Give a short name to your friend’s 
Bluetooth enabled device or to your own computer to 
be able to recognise it more easily.
Note: Choose a name which is easy to remember 
and recognise. Later when you are searching for 
devices or a device is requesting a connection, the 
name you have chosen will be used to identify the 
device.
Setting a device to be authorised or 
unauthorised
After you have paired with a device, you can set it to be 
authorised or unauthorised:
Unauthorised (default) - Connection requests from this 
device need to be accepted separately every time.
Authorised - Connections 
between your game deck and 
this device can be made 
without your knowledge. No 
separate acceptance or 
authorisation is needed. Use 
this status for your own 
devices, for example, your PC, 
or devices that belong to 
someone you trust. The icon 
 is added next to 
authorised devices in the Paired devices view. 
• In the Paired devices view, scroll to the device and 
select Options→ Set as authorised /Set as unauthorised.
Receiving data via Bluetooth
When you receive data via Bluetooth, a tone sounds and 
you are asked if you want to accept the Bluetooth 
message. If you accept,   is shown and the item is