Nokia N-GAGE - Messaging Settings

Messaging
85
Messaging settings
The Messaging settings have been divided into groups
according to the different message types. Scroll to the
settings you want to edit and press .
Settings for text messages
Options when editing text
message centre settings: New msg. centre, Edit, Delete,
Help, and Exit.
Go to Messaging and select Options→ Settings→ Text
message to open the following list of settings:
• Message centres - Lists all the text message service
centres that have been defined. See ‘Adding a new text
message centre’, p. 85.
• Msg. centre in use (Message centre in use) - Defines
which message centre is used for delivering text
messages and smart messages such as picture
messages.
• Receive report (delivery report) - When this network
service is set to Yes, the status of the sent message
(Pending, Failed, Delivered) is shown in the Log. When set
to No, only the status Sent is shown in the log. See p.
21.
• Message validity - If the recipient of a message cannot
be reached within the validity period, the message is
removed from the text message service centre. Note
that the network must support this feature. Maximum
time is the maximum amount of time allowed by the
network.
• Message sent as - The options are Text, Fax, Paging, and
E-mail. For further information, contact your network
operator.
Note: Change this option only if you are sure
that your service centre is able to convert text
messages into these other formats.
• Preferred connection - You can send text messages via
the normal GSM network or via GPRS, if supported by
the network. See ‘Packet data (General Packet Radio
Service, GPRS)’, p. 42.
• Reply via same ctr. (network service) - By setting this
option to Yes, if the recipient replies to your message,
the return message is sent using the same text
message service centre number.
Adding a new text message centre
1 Open Message centres and select Options→ New msg.
centre.
2 Press , write a name for the service centre and
press OK.
3 Press , press and write the number of the text
message service centre (Must be defined). Press OK.
You need the message centre number to send text and
picture messages. You receive the number from your
service provider.
• To take the new settings into use, go back to the
settings view. Scroll to Msg. centre in use, press and
select the new service centre.