Connectivity
120
Tip! When searching for devices, some
Bluetooth devices may show only the unique
Bluetooth addresses (device addresses). To find out
what the unique Bluetooth address of your game
deck is, enter the code *#2820# in standby mode.
Sending data via Bluetooth
Note: There can be only one active Bluetooth
connection at a time.
1 Open an application where the item you wish to send
is stored. For example, to send an image to another
compatible device, open the Images application, to
send a video clip to another compatible device, open
the Video Player application.
2 Scroll to the item you want to send, for example, an
image and select Options→ Send→ Via Bluetooth.
Tip! To send text via Bluetooth (instead of text
messages), go to Notes, write the text, and select
Options→ Send→ via Bluetooth.
3 The game deck starts to
search for devices within
range. Bluetooth enabled
devices that are within
range start to appear on
the display one by one.
You can see a device icon,
the device’s Bluetooth
name, the device type, or a
short name. Paired devices
are shown
with .
Note: If you have searched for Bluetooth
devices earlier, a list of the devices that were found
previously is shown first. To start a new search,
select More devices. If you switch off the game
deck, the list of devices is cleared and the device
search needs to be started again before sending
data.
• To interrupt the search, press Stop. The device list
freezes and you can start to form a connection to
one of the devices already found.
4 Scroll to the device you want to connect with and press
Select. The item you are sending is copied to Outbox
and the note Connecting is shown.
5 Pairing (if not required by the other device, see
step 6)
To Next Page
Loading...
