Nokia N-GAGE - Answering a Call

Using your game deck as a phone
19
participants can still continue talking with each
other while you have a private discussion with one
participant only. Once you have finished the private
conversation, select Options→ Add to conference to
return to the conference call.
• To drop one participant from the conference call,
select Options→ Conference→ Drop participant, then
scroll to the participant and press Drop.
Tip! The quickest way to make a new call is
to dial the number and press to start the
call. The existing call is automatically put on hold.
5 To end the active conference call, press .
Answering a call
• To answer an incoming call, press , or if you are
using the supplied headset press the remote control
button.
• To end the call, press , or if you are using the
supplied headset press the remote control button.
If you do not want to answer a call, press . The
caller will hear a “line busy” tone.
When a call comes in, press Mute to quickly mute the
ringing tone.
Tip! To adjust the game deck tones for different
environments and events, for example, when you want
your game deck to be silent, see ‘Profiles’, p. 90.
Note: It is possible that the game deck assigns a
wrong name for the phone number. This happens if the
phone number of the caller is not stored in Contacts
but the seven last digits of the number match another
number that is stored in Contacts. In this case, call
identification is not correct.
Tip! To end all calls at the same time, select
Options→ End all calls and press OK.
Call waiting (network service)
If you have activated the Call waiting service, the network
will notify you of a new incoming call while you have a
call in progress. See ‘Call waiting: (network service)’, p. 40.
1 During a call, press to answer the waiting
call. The first call is put on hold.
To switch between the two calls, press Swap.
2 To end the active call, press .
Tip! If you have activated the Call divert→ If busy
function to divert calls, for example, to your voice
mailbox, rejecting an incoming call will also divert the
call. See ‘Settings for call diverting’, p. 20.