Using your game deck as a phone
23
Cost shown as charging units or currency
• You can set the game deck to show the remaining talk-
time in charging units or units of currency. For this, you
may need the PIN2 code, see p. 46.
1 Select Options→ Settings→ Show costs in. The
options are Currency and Units.
2 If you choose Currency, a note requesting you to
write the unit price is shown. Key in the cost of your
home network charging or credit unit and press OK.
3 Write a name for the currency. Use a three-letter
abbreviation, for example, EUR.
Note: When no more charging units or currency
units are left, calls may only be possible to the
emergency number programmed into your game deck
(e.g. 112 or other official emergency number).
Setting a call cost limit for yourself
1 Select Options→ Settings→ Call cost limit→ On.
2 The game deck requests you to enter the limit in units.
For this you may need the PIN2 code. Depending on the
Show costs in setting, enter either the amount of
charging units or currency.
When the charging limit you have set yourself is reached,
the counter stops at its maximum value and the note Reset
all calls’ cost counter is displayed. To be able to make calls,
go to Options→ Settings→ Call cost limit→ Off. For this you
need the PIN2 code, see p. 46.
Erasing call cost counters - Select Options→ Clear
counters. For this you need the PIN2 code, see p. 46. To
clear an individual event, scroll to it and press .
GPRS data counter
Go to Menu→ Extras→ Log→ GPRS counter.
Allows you to check the amount of data sent and received
during packet data (GPRS) connections. For example, you
may be charged for your GPRS connections by the amount
of data sent and received.
Viewing the general log of calls
Go to Menu→ Extras→ Log and press followed
by .
In the general log, for each
communication event, you
can see the sender or
recipient name, phone
number, name of the service
provider, or access point.
Note: Sub-events,
such as a text message
sent in more than one
part and packet data
connections, are logged
as one communication event.
To Next Page
Loading...
