ACCESS GATEWAY
Configuring the Wireless Connect Gateway 27
PPTP Client (Point-to-Point Tunneling Protocol)
If “PPTP” is selected, then this screen will appear. Fill out all the information
provided by your ISP.
PPP MTU
Setting
1492 MTU (Maximum Transfer Unit) specifies maximum
transmission unit size.
TCP MSS
Setting
1452 MSS (Maximum Segment Size) specifies maximum segment
size.
Service Name Empty Enter the service name provided by your ISP. The service
name can consist of up to 64 alphanumeric characters and is
case sensitive.
Connect on Demand and Max Idle Time
Connect on
Demand
Enable You can configure your Wireless Connect Gateway to
disconnect from your ISP after a specified period of time
(Max Idle Time). If you have been disconnected due to
inactivity, Connect on Demand enables your Wireless
Connect Gateway to automatically re-establish your
connection as soon as you attempt to access the Internet
again. If you wish to activate Connect on Demand, click the
radio button. If you want your Internet connection to remain,
click the radio button of keep alive. The Max Idle Time
maximum value is 65535 minutes.
Max Idle Time 10 Minutes
Keep alive and Redial Period
Keep alive Disable This option keeps your PPPoE enabled Internet access
connected indefinitely, even when it sits idle. The redial
period maximum value is 65535 seconds.
Redial Period 30 Seconds
Item Default Description
To Next Page
Loading...
