Nordson MEG II - Page 17

13
MEG® II Airless Spray Guns with 10 ft Cable
© 2021 Nordson Corporation
1602990-12
8. Slide the seat retainer nut forward and thread it onto the seat. Tighten the seat

9. Insert the nozzle into the nozzle nut. Thread the nozzle nut onto the seat and tighten

overtighten the nut.
NOTE:  
the wrench on extended tip guns. Do not overtighten the nut.
10. 
procedure as detailed in the CleanSleeve Cover
1
2
5
6
4
3
Extended Tip Parts
Figure 4 Ball and Seat Replacement