Nortel 1230 - Managing Multiparty Calls; Using Call Join

Operating your IP Phone 1230
124
Managing multiparty calls
Use the following features to enable multiparty conversations
• “Using Call Join” on page 124
• “Setting up a Conference Call” on page 125
• “Using Conferee Selectable Display” on page 126
• “Using Group Call” on page 127
Using Call Join
Use the Call Join feature to connect a new caller to an active call. This
connection creates a conference (conversation involving more than two
parties) between the two callers and yourself.
6. Press the # key.
1. To connect a call on hold to your current
call, press the Conf soft key.
2. Press the line key of the caller you want
to connect to your current call.
3. Press the Conf soft key again to join the
person on hold to your conversation.
Conf
Conf