Customizing your IP Phone 1230—advanced features
84
A successful logon transfers all the features, time, date, and tones of your
office IP Phone 1230 to your remote IP Phone. Your Virtual Office session
expires after a fixed period of time which your system administrator
determines.
Using Virtual Office on your remote IP Phone
The display characteristics, including size of the display area, differ with
IP Phone models. Your Virtual Office display depends on the remote
IP Phone that you use to log on to your Virtual Office. All features are the
same as they appear on your office IP Phone 1230.
An IP Phone 1120E that is logged on remotely to an IP Phone 1230
provides less information than the IP Phone 1230 because it has fewer
display lines.
When an IP Softphone 2050 logs on remotely to an IP Phone 1230, the
information display is arranged differently, but all the information is visible
at one time.
Regardless of the IP Phone model that you use as a remote IP Phone, a
user information line appears that lists the number of your office
IP Phone.
4. At the prompt, enter the home Station
Control Password (SCPW).
If the user ID is not found locally, the
message Locating Remote Server
appears.
Note: After three failed logon attempts,
you must wait for an hour before you try
to log on again. Alternatively, contact
your system administrator to reset your
password. For more information, see
“Assigning an SCPW” on page 67.
To Next Page
Loading...
