Operating your IP Phone 1230
91
Deleting the entire Callers List
Use the following procedure to delete the entire Callers List.
Using the Redial List
The Redial List logs a maximum of 20 outgoing calls. When the list is full,
the system overwrites the oldest entry. Use the Redial List feature to
review calls made and to redial numbers. The Redial List contains
• the last and first names of the dialed party (if available)
• the DN of the dialed party
• the time and date of the last occurrence of the call
Note: If the caller name is not defined, then only the telephone
number is displayed.
Entries in the Redial List are sorted based on the time of the call.
The format of names in the Redial List depends on the configuration of
Preferred Name Match. The Calling Party Name Display (CPND) appears
according to the configuration settings on your IP Phone if Preferred
Name Match is active on your IP Phone. If Preferred Name Match is off,
the CPND appears as determined by the system configuration.
To access the Redial List, press the Directory key and select Redial
List. Alternatively, press the Outbox (Redial) key. If password control is
enabled, you must enter your SCPW at the prompt.
1. Press the Del soft key.
2. Choose Yes to delete the entire Callers
List
or
Choose No to return to the previous
screen
Del
or
NoYes
To Next Page
Loading...
