Nortel 1230 - Configuring New Call Indication

Customizing your IP Phone 1230—basic features
52
To log all incoming calls including calls while IP Phone is busy:
To log all incoming calls including calls while your IP Phone is busy, press
the Services key and select Call Log Options from the Telephone
Options menu.
1. Press the Up/Down navigation keys to scroll and highlight the
Incoming Calls option.
2. Press the Select soft key.
3. Press the Up/Down navigation keys to scroll and highlight Log calls
if busy.
4. Choose one of the following:
— Press the Select soft key to save the configuration.
— Press the Cancel soft key to keep existing configurations.
Configuring New Call Indication
You can configure your IP Phone 1230 to display a message that
indicates a new call. By default, this option is On.
Use the following procedure to configure New Call Indication.
5. Press the Select soft key to save the
configuration.
or
Press the Cancel soft key to keep
existing configurations.
1. Press the Services key, select
Telephone Options, and select Call
Log Options.
or
CancelSelect
(Services)