Nortel 1230 - Page 138

Operating your IP Phone 1230
138
Changing the status of a room
Use the following procedure to change the status of a room.
1. Press the RMK key.
2. Dial the Directory Number (DN) for the
room.
The DN appears followed by a two-digit
code.
The first digit indicates the occupancy
status:
0 = Room vacant
1 = Room occupied
The second digit indicates the cleaning
status of the room:
1 = Cleaning requested
2 = Cleaning in progress
3 = Room cleaned
4 = Room passed inspection
5 = Room failed inspection
6 = Cleaning skipped
3. Dial the status code for the room.
A three-digit code appears. The first digit
indicates the occupancy status, the
second is the previous cleaning status,
and the third is the new status.
4. Press the RMK key.
RMK
RMK