Customizing your IP Phone 1230—advanced features
68
Turning Password Protection on or off
Use the following procedure to turn Password Protection on or off.
5. Press the Enter key.
6. Enter your new password using the
dialpad. To enter special characters,
press the Up key. For information about
entering text, see “Using the telephone
dialpad” on page 87.
7. Press the Select soft key to accept the
new password.
Note: If you are locked out of your IP
Phone 1230, or if you forget your SCPW,
contact your system administrator.
1. Press the Directory key.
2. Press the Up or Down keys to scroll up
or down, and then select Change
Protection Mode.
3. Enter your new password using the
dialpad (if Password Protection is
enabled).
To enter special characters, press the
Up key. For information about entering
text, see “Using the telephone dialpad”
on page 87.
Select
(Directory)