Notifier BACnet GW-3 - Appendix B: Bacnet GW-3 Compatible Node Types; B.1: Direct Connect Node Type Compatibility; Table B.1 Panel Communication Connection Table

47BACnet Gateway-3 Installation and Operation Manual - P/N: 53372:Rev: A 5/6/09
Appendix B: BACnet GW-3 Compatible Node Types
B.1 Direct Connect Node Type Compatibility
Refer to Section 3.2.3, “Connecting BACnet GW-3 Directly to a Fire Alarm Control Panel” on
page 38.
NOTE: The BACnet GW-3 requires that at least one node on the NFN network be an ONYX
series panel. BACnet GW-3 does not operate on an NFN network with no ONYX series panels.
Table B.1 Panel Communication Connection Table
Supported Panel Types
NFS-320
NFS2-640
NFS2-3030
NCM
NFS-640
NFS-3030