Need help?Do you have a question about the Notifier CFP-600-E and is the answer not in the manual?
General| Brand | Notifier |
|---|---|
| Model | CFP-600-E |
| Category | Control Panel |
| Language | English |
Covers overall safety warnings and cautions for installation.
Details wire sizing, power disconnection, enclosure modification, and static protection.
Outlines smoke detector limits, power failure effects, equipment compatibility, and maintenance.
Explains control silence, silenced control reset, and evacuation activation/deactivation.
Details the process for resetting all alarms and troubles in the system.
Explains password entry mechanism and default passwords for system access.
Explains the procedure to enable or disable individual zones.
Explains the process for modifying the Level 1 access password.
Details selecting specific zones for conducting manual detector walk-tests.
Explains the procedure for modifying the Level 2 access password.
Introduces the comprehensive set of functions available in Level 4 configuration.
Describes how to include or exclude zones from signaling alarms or troubles.
Details mapping events to logic zones for activating specific functions.
Allows programming zone thresholds, night mode, and reset relay behaviors.
Maps detecting zones to specific output relays on the optional 16-relay board.
Sets parameters for prealarm, alarm, sounder, and walk-test time durations.
Maps detecting zones to specific release channels on optional boards.
Explains the procedure to modify passwords for all access levels (1 to 4).
Presents the main wiring diagram showing all connections for the control panel.
To Next Page