Notifier CFP-600-E - Programming the System Name

PROGRAMMING THE SYSTEM NAME
This programming is referred to the max 16-character programmable label which appears on the display when no Alarms
or Troubles exist.
Press ENTER
Use CURSOR keys to enter the letters, then press
ENTER after entering each character
Press ESC key if you DO NOT WANT to change the programming.
CLEARING THE CONTROL PANEL MEMORY
This function allows to clear the programmings and to reset the factory-default values.
Select the desired operation on the menu and press ENTER.
After confirming the operation a control panel restart will be carried out, giving the factory-default values.
CHANGE LANGUAGE DISPLAY
Seven languages are availble on the EPROM installed on the control panel.
The user may choose in which language read the messages that appear on the liquid crystal display.
•
Use CURSOR keys to select the number corresponding to the desired language.
•
Press ENTER key
The abbreviation used refer to the following languages:
»
On request, it is also available a Software Version in ENGLISH and RUSSIAN CYRILLIC characters.
CFP-600-Prog-4.VP Installation and Operating Manual Page 17
Doc. M-131.1-CFP600-ENG Rev. B.1 NOTIFIER ITALIA
SYSTEM NAME |A08
CONFIGURATION |G08
|D00
|E00
SYSTEM NAME |A08
CONFIGURATION |G08
|D00
NOTIFIER |E00
MEMORY CLEARING|A08
CONFIGURATION |G08
|D00
|E00
MEMORY CLEARING|
|
|
: YES Exit |
Press ENTER to confirm.
LANGUAGE SEL. |A08
CONFIGURATION |G08
|D00
|E00
LANGUAGE SEL. |A08
1:I 2:E 3:F 4:DU |G08
5:ES 6:D 7:SV __ |D00
|E00
EPROM/STD
•
1:I = ITALIAN
•
2:E = ENGLISH
•
3:F = FRENCH
•
4:DU= DUTCH
•
5:ES= SPANISH
•
6:D = GERMAN
•
7:SV= SWEDISH
EPROM/EST
•
1:EN = ENGLISH
•
2:M = MACEDONIAN
•
3:Y = SERBIAN
•
4:U = HUNGARIAN
•
5:SLO= SLOVENIAN
•
6:RO = ROMANIAN
•
7:C = CROATIAN
EPROM/RUSSIAN
•
1:EN= ENGLISH
•
2:R = RUSSIAN
•
3:I = ITALIAN