Notifier CFP-600-E - Zone Management; Display Zone Status; Change Zone Enable;Disable Status

q LED STATUS OF RELEASE BOARD
DISPLAY ZONE STATUS
The display will show the first zone status, with the following messages:
• NORMAL = Included and Enabled Zone, without Alarms or Troubles
• ALARM = Included and Enabled Zone, in Alarm status
• LINE SHORT. C. = Included and Enabled Zone, in Short Circuit status
• LINE CUT = Included and Enabled Zone with wire cut
• DISABLED = Included Zone but Disabled, without Troubles
•
EXCLUDED = Excluded Zone
To select another zone use CURSOR KEYS
Press ESC to leave this function.
Page 4 Installation and Operating Manual CFP-600-Prog-1.VP
NOTIFIER ITALIA Rev. B.1 Doc. M-131.1-CFP600-ENG
RELEASE BOARD
PROGRAMMED
RELEASE BOARD
INSTALLATION
INHIBITION RELEASE TROUBLE
LED
RELEASE INHIBITION
LED
 Included
\ Excluded
 Installed
\ Not installed
 YES
 NO
 Turned ON
 Blinking
\ Turned OFF
 Turned ON
 Blinking
\ Turned OFF
 Included
\ Excluded
 Installed
 Not installed
 YES
\ NO
 Turned ON
 Blinking
\ Turned OFF
\ Turned ON
 Blinking
 Turned OFF
\ Included
 Excluded
 Installed
 Not installed
 YES
 NO
 Turned ON
\ Blinking
 Turned OFF
\ Turned ON
 Blinking
 Turned OFF
\ Included
 Excluded
 Installed
 Not installed
 YES
 NO
 Turned ON
 Blinking
\ Turned OFF
 Turned ON
 Blinking
\ Turned OFF
\ Included
 Excluded
\ Installed
 Not installed
\ YES
 NO
 Turned ON
 Blinking
\ Turned OFF
 Turned ON
\ Blinking
 Turned OFF
ZONE STATUS |A08
|G02
Z01 ALARM |D00
|E00