NTI VM110 - Condensate Drain Piping

Condensate Drain│ Vmax I&O Manual
26
Figure 6-1 Condensate Drain Piping
Inspect Condensate
Trap assembly
Attach to Boiler Condensate Drain
Condensate Trap
(factory supplied)
 Outlet to Drain
Gear Clamp
(factory supplied)
Boiler Condensate Drain
Direct condensate to a vented drain, ensure no strain is
applied to the Condensate Trap and Boiler Condensate
Drain. If necessary, add a piece of ¾” tubing to the
bottom of the Condensate Trap as illustrated.
Tighten gear clamps and pull
down on Condensate Trap to
test secureness