Numatic TTB 1840 - Quick Set-Up Guide

20
Using the handle position lever, move the handle into the upright position
(Fig.1).
Fit the Brush / Pad (Fig.2).
Swing the oor-tool carrier from behind the brush (Fig.3).
Fit the battery to the machine (Fig.5) and plug in the power supply (Fig.5a).
Ensure the battery has been charged before use.
Fill the clean-water to a Max of 18 litres
(see page 10)
For operation and cleaning
controls (see page 14)
Quick Set-Up Guide
PLEASE READ BEFORE COMMENCING ANY OPERATION
AFTER THE REMOVAL OF ALL THE PACKAGING, CAREFULLY OPEN AND CHECK THE CONTENTS.
ENSURE THE BATTERIES ARE CHARGED BEFORE USE.
!!
1
2
3
4
5
5a