24
The TTB 1840 is equipped with a large 18 litre clean-water tank allowing large areas to be cleaned in a single ll.
Filling the clean-water tank
To ll the clean-water tank, remove the ller cap (Fig.10).
Fill using a hose, bucket or a suitable container (Fig.11).
Note:
Great care must be taken to ensure that contaminants (leaves,hair, dirt, etc) are not allowed to enter the
clean-water tank during the lling process. If using a bucket or similar, ensure it is always clean and free from debris.
Fill Level Indicator
Fill the clean-water tank to a maximum of 18 litres, including cleaning chemicals if required.
Follow chemical manufacturing guidelines.
This allows the machine to be tipped back and moved without spillage (see page 12).
Use the ll indicator
(Fig.12)
Showing the clean-water tank full
(Fig.13a)
Showing the clean-water tank empty
(Fig.13)
Machine Set-Up
To Next Page
Loading...
