Nvidia Jetson Orin NX Series User Manual

Power
PRELIMINARY INFORMATION
Jetson Orin NX Series and Jetson Orin Nano Series DG-10931-001_v1.1 | 18
Note: The carrier board must support VDD_IN at 5V. Supporting the extended range of 5V 20V
is optional.
Figure 6-1. System Power and Control Block Diagram
Switch
MODULE_ID
High Voltage
Supply
VDD_IN
(to module)
Switch
5V
Supply
Module ID
= Low
Module ID =
High
EN
EN*
Figure 6-2. System Power and Control Block Diagram
Notes:
1. MODULE_ID indicates the capability of the module. Low: Legacy module with VDD_IN = 5V
nominal. High: Advanced module supporting wide VDD_IN range (5V-20V).
2. Designs which implement an eFUSE or current limiting device on the input power rail of the
module should select a part that DOES NOT limit reverse current.

Nvidia Jetson Orin NX Series Specifications

General

Networking	Gigabit Ethernet
Module Size	69.6 mm x 45 mm
Operating System	Linux (JetPack SDK)
GPU	NVIDIA Ampere architecture with 1024 CUDA cores
CPU	8-core ARM Cortex-A78AE v8.2 64-bit CPU
Memory	16GB 128-bit LPDDR5
Storage	eMMC 5.1
AI Performance	100 TOPS (INT8)
Camera	Up to 6 cameras (24 via virtual channels) CSI camera
Power	15W to 25W
Video Encode	1x 4Kp60 | 2x 4Kp30 | 4x 1080p60
Connectivity	PCIe Gen4
Other I/O	GPIO, I2C, SPI, UART, CAN