NVIDIA Jetson TX2/TX2i OEM Product Design Guide
JETSON TX2/TX2i OEM PRODUCT | DESIGN GUIDE | 20180618 88
16.4.2 Trace Length
The maximum trace length for a given signal is determined by the maximum allow able propagation delay and impedance for the
signal. Higher frequency signals must be treated as transmission lines (see “Appendix C – Transmission Line Primer”) to
determine proper trace characteristics for a signal.
All signals on the graphics card maintain different trace guidelines; please refer to the corresponding signal chapter in the
Design Guide to determine the guidelines for the signal.
To Next Page
Loading...
