Nvidia Quadro K5000 User Manual

Quadro K4000/K5000/K6000 SDI DU-05337-002_v01 | 12
Chapter 02 : NVIDIA Graphics-to-SDI
Recommended Operating Practices
This section provides some basic operating practices to follow in order to obtain the best
SDI performance for your application.
Initial On-Air Broadcast
When starting a live broadcast of SDI video, follow the sequence below to ensure proper
allocation of system resources and to prevent visual disturbances in the on air broadcast.
1 Set up the SDI format settings and start the SDI output
2 Start the application to be broadcast
3 Verify the video quality
4 Close the Graphics to SDI control panel
5 Go on air
To avoid visual disturbances while broadcasting live, DO NOT
• Start or stop the graphics or video application
• Turn on or off the SDI output
• Make changes to the SDI signal format
Changing Applications
To avoid visual disturbances while switching applications, observe the following
sequence:
1 Stop the live broadcast (go off air)
2 Stop the application
3 Start the new application
4 Verify video quality
5 Resume the live broadcast

Nvidia Quadro K5000 Specifications

General

CUDA Cores	1536
Memory Size	4 GB
Memory Type	GDDR5
Memory Interface	256-bit
Memory Bandwidth	173 GB/s
Max Power Consumption	122 W
DirectX	11
OpenGL	4.5
Architecture	Kepler
GPU	GK104
Bus Interface	PCI Express 3.0 x16
Form Factor	Dual Slot
Display Connectors	2x DVI, 2x DisplayPort
Interface	PCIe 3.0 x16
Max Resolution	3840x2160
Outputs	DisplayPort + DVI-I