Nvidia Quadro K5000 User Manual

Quadro K4000/K5000/K6000 SDI DU-05337-002_v01 | 31
Chapter 04 : Linux—Using the Graphics to Video Out Control Panel
 OpenGL application control: The SDI application programming interface allows
OpenGL applications to have full and exclusive control of the SDI output.
To use this mode, run an application that uses either SDI APIs to make use of the SDI
device.
Basic SDI Setup Under Clone Mode
Step 1: Open the NVIDIA Graphics to Video Out Property Page
1 From the command line, enter “ nvidia-settings ”
The NVIDIA X Server Settings page appears.
Figure 0.1 NVIDIA X Server Settings Page
2 Click the Graphics to Video Out tree item from the side menu.
To ensure proper operation, NVIDIA recommends the following -
 Set the desktop resolution to be the same or larger than the SDI output for better
image quality
 Stop background applications—such as virus scan, backup and archiving
applications—prior to starting SDI output and going on air.
 Close the control panel before going on air.

Nvidia Quadro K5000 Specifications

General

CUDA Cores	1536
Memory Size	4 GB
Memory Type	GDDR5
Memory Interface	256-bit
Memory Bandwidth	173 GB/s
Max Power Consumption	122 W
DirectX	11
OpenGL	4.5
Architecture	Kepler
GPU	GK104
Bus Interface	PCI Express 3.0 x16
Form Factor	Dual Slot
Display Connectors	2x DVI, 2x DisplayPort
Interface	PCIe 3.0 x16
Max Resolution	3840x2160
Outputs	DisplayPort + DVI-I