Nvidia Quadro K5000 User Manual

Quadro K4000/K5000/K6000 SDI DU-05337-002_v01 | 25
Chapter 03 : Windows–Using the Graphics to SDI Control Panel
About Dualview and Clone Modes
The SDI display appears in windows just like a standard display so it is possible to
configure and use it as a separate display or configure it as a clone of another display.
Configure the display topology from the NVIDIA Control Panel -> Set up multiple
displays page.
Figure 3.2 Set Up Multiple DIsplays Page

Nvidia Quadro K5000 Specifications

General

CUDA Cores	1536
Memory Size	4 GB
Memory Type	GDDR5
Memory Interface	256-bit
Memory Bandwidth	173 GB/s
Max Power Consumption	122 W
DirectX	11
OpenGL	4.5
Architecture	Kepler
GPU	GK104
Bus Interface	PCI Express 3.0 x16
Form Factor	Dual Slot
Display Connectors	2x DVI, 2x DisplayPort
Interface	PCIe 3.0 x16
Max Resolution	3840x2160
Outputs	DisplayPort + DVI-I