Nvidia Quadro K5000 User Manual

Quadro K4000/K5000/K6000 SDI DU-05337-002_v01 | 14
03 WINDOWS–USING THE GRAPHICS TO
SDI CONTROL PANEL
This chapter explains how to set up the NVIDIA Quadro SDI graphics card for Windows
under Clone or Dualview mode using the NVIDIA Control Panel Manage SDI Output
Settings page. It contains the following sections:
 “How to Set Up the Graphics-to-SDI Output” on page 15 provides step-by-step
instructions for using the control panel to set up the SDI output.
 “Advanced Adjustments” on page 21 explains additional adjustments you can make
to the SDI output.
 “About Dualview and Clone Modes” on page 25
 “Enabling Multiple SDI Cards” on page 27
 “Allowing Application Control of the SDI Output” on page 28

Nvidia Quadro K5000 Specifications

General

CUDA Cores	1536
Memory Size	4 GB
Memory Type	GDDR5
Memory Interface	256-bit
Memory Bandwidth	173 GB/s
Max Power Consumption	122 W
DirectX	11
OpenGL	4.5
Architecture	Kepler
GPU	GK104
Bus Interface	PCI Express 3.0 x16
Form Factor	Dual Slot
Display Connectors	2x DVI, 2x DisplayPort
Interface	PCIe 3.0 x16
Max Resolution	3840x2160
Outputs	DisplayPort + DVI-I