Safety Manual for MPC5777M, Rev. 1.1
Further information
NXP Semiconductors92
Table 22. Acronyms and abbreviations
Terms Meanings
ADC Analog to Digital Converter
BAF Boot Assist Flash
BAR Boot Assist ROM
CCF Common Cause Failure
CMU Clock Monitor Unit
CRC Cyclic Redundancy Check
CTU Cross-Triggering Unit
DC Diagnostic Coverage
ECC Error Correcting Code
DMA Direct Memory Access
ERRM Error Out Monitor function
EXWD External Watchdog function
FCCU Fault Collection and Control Unit
FMEDA Failure Modes, Effects & Diagnostic Analysis
FMPLL Frequency-Modulated Phase-Locked Loop
GPIO General Purpose Input/Output
LBIST Logic Built-In Self-test
MBIST Memory Built-In Self-test
MC_CGM Clock Generation Module
MC_ME Mode Entry
MCU Microcontroller Unit
MPU Memory Protection Unit
NCF Non-Critical Fault
NMI Non-Maskable Interrupt
NVM Non-Volatile Memory
PMU Power Management Unit
PSM Power Supply and Monitor function
PST Process Safety Time
RCCU Redundancy Control Checking Unit
MC_RGM Reset Generation Module
SM Safety Manual
SIL Safety Integrity Level
SSCM System Status and Control Module
SWG Sine Wave Generator
SWT Software Watchdog Timer
To Next Page
Loading...
Need help?
General
