NXP Semiconductors S32R274 - 4.7. Camera Serial Interface (MIPI-CSI2); 4.8. Gigabit Ethernet

Configuration – Daughter card
S32R274/372 EVB User Guide, Rev. 0, 08/2018
NXP Semiconductors 21
Figure 18. SIPI connector pinout
4.7. Camera Serial Interface (MIPI-CSI2)
A dedicated MIPI-CSI2 interface is provided on the daughtercard, and is designed to provide
compatibility with the Eagle MR3003 Radar front end EVK. To preserve signal integrity MIPI-CSI2
signals are not routed to the motherboard.
A 60 pin Samtec connector (QTH-030-01-L-D-A-K-TR) is used for the MIPI-CSI2 interface. The pinout
of the connector is shown in Figure 19.
Figure 19. MIPI-CSI2 connector pinout
4.8. Gigabit Ethernet
The S32R274RRUEVB daughtercard includes support for Gb ethernet, utilizing the RGMII interface
present on the S32R274 device. The daughtercard is designed with a Micrel KSZ9031RNXUA Ethernet