E
23
Loading an SD Memory Card
The camera comes with 11MB of internal memory, allowing you to store images and video
clips in the camera. However, you can expand the memory capacity by using the SD memory
card so that you can store additional images and video clips.
1. Make sure the camera is turned off.
2. Slide the battery/SD memory card cover in the direction of
the OPEN arrow.
3. Insert the SD memory card.
The front side of the memory card (printed arrow) should
face towards the front side of the camera.
If the card cannot be inserted, check the orientation.
4. Close the battery/SD card cover.
To remove the SD memory card, make sure the camera
is off. Open the battery/SD card cover. Press lightly on
the edge of the memory card and it will eject.
To prevent valuable data from being accidentally erased from an SD memory card you can slide the write-protected
tab (on the side of the SD memory card) to "LOCK".
To save, edit or erase data on an SD memory card, you must unlock the card.
To Next Page
Loading...
Need help?
General
